Tunze Doc Skimmer 9001

Product Information

The Tunze 9001 and Tunze 9002 are both effective and efficient reef tank skimmers, but they are not rated for the same tank capacity. The 9002 features a larger and more powerful motor, making it better suited for larger aquariums. However, if you have a nano-tank, you should be fine with the smaller Tunze 9001. Consider your needs and buy based on your tank and reef requirements. Both the Tunze 9001 and 9002 are great reef skimmers but, ultimately, the right choice depends on the size of your aquarium and your budget. If you have a nano-sized reef aquarium, we recommend the Tunze 9001. If you have a larger reef aquarium, we recommend the Tunze 9002. Conclusion The 9002 uses slightly more power, requiring 10 Watts of electricity to pull in 150 liters of air every hour. With a stronger motor, it creates a steadier stream of foam that flows into a 0.3-liter skimmer cup without creating micro-bubbles inside the tank. The foam simply passes into the skimmer cup, helping to keep your tank clean through the week.

Mine works with an air pump and air stone. I put the pump outside so i don't hear it at all, but even when it was sitting right next to the tank on the shelf, i could suddenly hear the rest of the tank machinery which i almost couldnt before and i stopped having to turn up the tv. Your budget – Both products are reasonably priced, but keep your budget in mind as you start shopping. Thus, a DOC skimmer for 1,000 liters (264 USgal.) should be used for a tank with a maximum content of approx. 400 liters (106 USgal.). Thus, a DOC skimmer for 1,000 liters (264 USgal.) should be used for a tank with a maximum content of approx. 600 liters (158 USgal.).

Orders Over $49 Ship Free

In this product review and buyer’s guide, we’ll provide an in-depth look at both the Tunze 9001 and 9002 tank skimmers. We’ll examine their specs and discuss which types of tanks they are best suited for. By the end of this guide, you should have a clearer understanding of which skimmer best suits your needs. Tunze 9001 Product Review The size of your reef aquarium – A larger aquarium needs a more powerful skimmer to process all of the water. So, I'm a new reefer and I got this Tunze 9001 (bought it secondhand, but is fairly new and still has warranty) for my 60L (16G) tank. Now that we’ve taken an in-depth look at each product, it’s time to decide which one is right for your reef aquarium. You’ll need to choose based on a few simple factors, such as: I did find out that the pump of this skimmer (mine at least) is basically silent and the noise comes from the air intake (and is especially loud if you listen closely to the opening of the air tube). As I read about people extending air tubes of skimmers to quiet them down, I tried replacing the air tube that comes with the skimmer with a slightly longer one. And even though I'm not sure why: it does actually seem to work!

Thanks to its relatively small and low-energy motor, the Tunze 9001 is incredibly quiet and can run all night without bothering a soul. The only downside to this model is that the skimmer cup can be difficult to remove, making it harder to clean the skimmer. Nevertheless, this is a wonderful option for nano-sized reef aquariums and will quietly work throughout the day and night. Tunze 9002 Product Review Though many people do seem to have it working properly... Or they just deal with the noise. Or the fact that it's not skimming properly. The type of reef aquarium you have – The density of your reef can also affect how powerful of a skimmer you need. The skimmer is quieter now! The air tube isn't even much longer, just a few centimeters. I still put the silencer on at the end... I did notice that taking the silencer off also makes a difference now, whereas before it didn't seem to matter whether it was on or off. It doesn't seem to affect the performance. Using the Tunze Flash Skimming Principle, the Comline DOC Skimmer pulls water through an efficient surface suction.I played around with it a little more now and did find out that the default position has least microbubbles. In this position I barely have any and with the two others they're allover the place... You do need to put the little sponge in, then. Set up was extremely painless. Simply mount the skimmer using provided magnets. Next place skimmer on the wavy line that is located on the front of skimmer. This is the required water level and we found it was spot on. Last, plug the little guy in! Bubbles produced by the Tunze Comline Doc Skimmer measure only 1-3mm allowing for easy distribution into the skimmer cup once loaded with protein. The unique performance of the Tunze Comline Doc Skimmer sets itself apart from other protein skimmers on the market, as its exclusive design ensures that the substances absorbed by the bubbles do not return to the water. Preventing the skimmer from over foaming, is thepatented anti-overfoaming system intermediate chamber, which simultaneously controls the performance of the device.

If your reef aquarium is prone to accumulating scum and organic matter, you’ve probably considered investing in a new Tunze reef skimmer. By circulating water through a chamber and introducing air into the tank, these skimmers create a foam that traps organic material and small particles. Yet, for it to work, you need the right product. So, should you buy the Tunze 9001 or the Tunze 9002?Thus, a DOC skimmer for 1,000 liters (264 USgal.) should be used for a tank with a maximum content of approx. 300 liters (79 USgal.).

leather coral aquariums with long-polyp corals and anemones, for example, the load of dissolved organic matter may be higher, sometimes it may even be vital.Two of our favorite aspects of the 9001 are how easily it is to hide and the silent operation. The skimmer is so small it will easily fit in many AIO chambers along with AIO’s with hoods. You could run this in your bedroom or office without ever hearing it! While the 9001 works so well it does have a few quirks. First, the magnet that mounts to the skimmer itself uses four small plastic “clips”. And three: The microbubbles. I've read that many people have had issues with this. Some found a solution, of which I tried a few of, but I couldn't find a way to fix it yet. Perhaps it has to break in? Although it's not that I just put it in the tank: it has been in the water for a bit (but not working) so it does have that little slime film on it.